BCDJB - VESPEL PRECISION PARTS SP-21D

Product Identification

Product ID:VESPEL PRECISION PARTS SP-21D
MSDS Date:01/01/1985
FSC:9330
NIIN:00K001633
MSDS Number: BCDJB

Responsible Party
E.I.DUPONT DE NEMOURS & COMPANY,INC

Emergency Phone: (302) 774-2421

Cage: DO229

Contractor
E.I.DUPONT DE NEMOURS & CO INC
1635 BOSTON, MA 02118 US

Telephone: 800-441-7515

Cage: DO229

Ingredients

POLY-N,N,(P,P-OXYDIPHENYLENE PYROMELLITIMIDE; WT% BY

Fraction By Weight: 84.5%


GRAPHITE, SYNTHETIC

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: 15.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


POLYTETRAFLUOROETHYLENE

CAS: 116-14-3

RTECS: KX4025000

Fraction By Weight: 0.5%

Hazards

Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
HEALTH.

First Aid

First Aid:NONE NOTED BY MFR-SEE SUPPLEMENTAL DATA FOR INFO.

Fire Fighting

Flash Point:NONE
Extinguishing Media:EXTINGUISH W. AGENT SUITABLE FOR SURROUNDING FIRE

Accidental Release

Spill Release Procedures:USE PROTECTIVE EQUIPMENTS SUCH AS GLOVES &
SAFETY GLASS WHILE COLLECTING BROKEN PIECES OF PLASTIC PARTS OR
SCRAP OF PLASTIC.PLACE DAMAGED PARTS OR PIECES OF PARTS IN CLOSED
CONTAINERS FOR LATER DISPOS AL.

Handling

Handling and Storage Precautions:NONE STATED BY MFR.
Other Precautions:NO SPECIAL MACHINING PRECAUTIONS ARE NEEDED.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:ADEQUATE VENTILATION WHEN USE TEMP ABOVE 570F
Protective Gloves:AS REQUIRED
Eye Protection:AS REQD OR SAFETY GLASSES
Supplemental Safety and Health
MSDS FROM MFR DATED:10/08/77;MFR SPECIFIED,ITEM IS PREFABRICATED PART
OF HIGH TENPRATURE PLASTIC USED IN AIRCRAFT JET ENGINES.THEREFORE,
SAFETY/HEALTH DATA NOT AVAILABLE/APPLICABLE(5/31/84).

Chemical Properties

HCC:N1
Spec Gravity:1.435
Evaporation Rate & Reference:NIL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK(SOLID PART) IN COLOR; NO ODOR.
Percent Volatiles by Volume:<1%

Stability

Stability Indicator/Materials to Avoid:YES
UNKNOWN(NONE NOTED BY MFR)
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:CO*2,CO;DEGRDATION PRODUCTS OF
POLYTETRAFLUOROETHYLENE.

Disposal

Waste Disposal Methods:MFR SPECIFIED BURIAL PROCEDURE TO DISPOSE OF
WASTE/DAMAGED PARTS IAW FEDERAL STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.